LED T8 Full Glass Tube | Crompton Lamps Ltd

Products


LED T8 Full Glass Tube

#

LED T8 2ft Full Glass Tube

LED T8 full glass tube providing 320° light output. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 3000K warm white, 4000K cool white or 6500K daylight colour options
• Standard 2ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC 
• Internal diffused coating
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.  
LED T8 2ft Full Glass Tube
#

LED T8 3ft Full Glass Tube

LED T8 full glass tube providing 320° light output. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 3000K warm white, 4000K cool white or 6500K daylight colour options
• Standard 3ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC  
• Internal diffused coating
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.   
LED T8 3ft Full Glass Tube
#

LED T8 4ft Full Glass Tube

LED T8 full glass tube providing 320° light output. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 3000K warm white, 4000K cool white or 6500K daylight colour options
• Standard 4ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC  
• Internal diffused coating
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.   
LED T8 4ft Full Glass Tube
#

LED T8 5ft Full Glass Tube

LED T8 full glass tube providing 320° light output. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 3000K warm white, 4000K cool white or 6500K daylight colour options
• Standard 5ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC  
• Internal diffused coating
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.   
LED T8 5ft Full Glass Tube
#

LED T8 6ft Full Glass Tube

LED T8 full glass tube providing 320° light output. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 4000K cool white or 6500K daylight colour options
• Standard 6ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC  
• External diffusing sleeve
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.   
LED T8 6ft Full Glass Tube
#

LED T8 2ft Full Glass Tube Shatterproof

Our non-foodsafe coating is IEC 61549 compliant and are banded with a dual green band These are an economical option for standard lamps for open and enclosed fittings.
 
LED T8 full glass tube providing 320° light output with shatterproof coating. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 3000K warm white, 4000K cool white or 6500K daylight colour options
• Standard 2ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC  
• Internal diffused coating
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.   
 
Crompton shatterproof tubes are full glass tubes coated in a special material with the sole purpose of fragment retention. A glass tube breakage can put a costly stop to production, as well as obvious health risks that glass fragments can create. A common misconception is that the glass tube itself is shatterproof, when in fact it is the sleeve acting as an aid to glass retention. The material is either extruded or heat shrunk to a fluorescent lamp, acting as a glass collector should the lamp itself shatter. 
LED T8 2ft Full Glass Tube Shatterproof
#

LED T8 3ft Full Glass Tube Shatterproof

Our non-foodsafe coating is IEC 61549 compliant and are banded with a dual green band These are an economical option for standard lamps for open and enclosed fittings.
 
LED T8 full glass tube providing 320° light output with shatterproof coating. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 3000K warm white, 4000K cool white or 6500K daylight colour options
• Standard 3ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC  
• Internal diffused coating
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.   
 
Crompton shatterproof tubes are full glass tubes coated in a special material with the sole purpose of fragment retention. A glass tube breakage can put a costly stop to production, as well as obvious health risks that glass fragments can create. A common misconception is that the glass tube itself is shatterproof, when in fact it is the sleeve acting as an aid to glass retention. The material is either extruded or heat shrunk to a fluorescent lamp, acting as a glass collector should the lamp itself shatter. 
LED T8 3ft Full Glass Tube Shatterproof
#

LED T8 4ft Full Glass Tube Shatterproof

Our non-foodsafe coating is IEC 61549 compliant and are banded with a dual green band These are an economical option for standard lamps for open and enclosed fittings.
 
LED T8 full glass tube providing 320° light output with shatterproof coating. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 3000K warm white, 4000K cool white or 6500K daylight colour options
• Standard 4ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC  
• Internal diffused coating
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.   
 
Crompton shatterproof tubes are full glass tubes coated in a special material with the sole purpose of fragment retention. A glass tube breakage can put a costly stop to production, as well as obvious health risks that glass fragments can create. A common misconception is that the glass tube itself is shatterproof, when in fact it is the sleeve acting as an aid to glass retention. The material is either extruded or heat shrunk to a fluorescent lamp, acting as a glass collector should the lamp itself shatter. 
LED T8 4ft Full Glass Tube Shatterproof
#

LED T8 5ft Full Glass Tube Shatterproof

Our non-foodsafe coating is IEC 61549 compliant and are banded with a dual green band These are an economical option for standard lamps for open and enclosed fittings.
 
LED T8 full glass tube providing 320° light output with shatterproof coating. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 3000K warm white, 4000K cool white or 6500K daylight colour options
• Standard 5ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC  
• Internal diffused coating
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.   
 
Crompton shatterproof tubes are full glass tubes coated in a special material with the sole purpose of fragment retention. A glass tube breakage can put a costly stop to production, as well as obvious health risks that glass fragments can create. A common misconception is that the glass tube itself is shatterproof, when in fact it is the sleeve acting as an aid to glass retention. The material is either extruded or heat shrunk to a fluorescent lamp, acting as a glass collector should the lamp itself shatter. 
LED T8 5ft Full Glass Tube Shatterproof
#

LED T8 6ft Full Glass Tube Shatterproof

Our non-foodsafe coating is IEC 61549 compliant and are banded with a dual green band These are an economical option for standard lamps for open and enclosed fittings.
 
LED T8 full glass tube providing 320° light output with shatterproof coating. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 3000K warm white, 4000K cool white or 6500K daylight colour options
• Standard 6ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC  
• Internal diffused coating
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.   
 
Crompton shatterproof tubes are full glass tubes coated in a special material with the sole purpose of fragment retention. A glass tube breakage can put a costly stop to production, as well as obvious health risks that glass fragments can create. A common misconception is that the glass tube itself is shatterproof, when in fact it is the sleeve acting as an aid to glass retention. The material is either extruded or heat shrunk to a fluorescent lamp, acting as a glass collector should the lamp itself shatter. 
LED T8 6ft Full Glass Tube Shatterproof
#

LED T8 2ft Full Glass Tube Food-Safe Shatterproof

Our foodsafe coating, which is IEC 61549 compliant and can also used for long life lamps is recognisable by a green band.
 
LED T8 full glass tube providing 320° light output with food-safe shatterproof coating. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 3000K warm white, 4000K cool white or 6500K daylight colour options
• Standard 2ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC  
• Internal diffused coating
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.   
 
Crompton shatterproof tubes are full glass tubes coated in a special material with the sole purpose of fragment retention. A glass tube breakage can put a costly stop to production, as well as obvious health risks that glass fragments can create. A common misconception is that the glass tube itself is shatterproof, when in fact it is the sleeve acting as an aid to glass retention. The material is either extruded or heat shrunk to a fluorescent lamp, acting as a glass collector should the lamp itself shatter. 

LED T8 2ft Full Glass Tube Food-Safe Shatterproof
#

LED T8 3ft Full Glass Tube Food-Safe Shatterproof

Our foodsafe coating, which is IEC 61549 compliant and can also used for long life lamps is recognisable by a green band.
 
LED T8 full glass tube providing 320° light output with food-safe shatterproof coating. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 3000K warm white, 4000K cool white or 6500K daylight colour options
• Standard 3ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC  
• Internal diffused coating
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.   
 
Crompton shatterproof tubes are full glass tubes coated in a special material with the sole purpose of fragment retention. A glass tube breakage can put a costly stop to production, as well as obvious health risks that glass fragments can create. A common misconception is that the glass tube itself is shatterproof, when in fact it is the sleeve acting as an aid to glass retention. The material is either extruded or heat shrunk to a fluorescent lamp, acting as a glass collector should the lamp itself shatter. 
LED T8 3ft Full Glass Tube Food-Safe Shatterproof
#

LED T8 4ft Full Glass Tube Food-Safe Shatterproof

Our foodsafe coating, which is IEC 61549 compliant and can also used for long life lamps is recognisable by a green band.
 
LED T8 full glass tube providing 320° light output with food-safe shatterproof coating. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 3000K warm white, 4000K cool white or 6500K daylight colour options
• Standard 4ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC  
• Internal diffused coating
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.   
 
Crompton shatterproof tubes are full glass tubes coated in a special material with the sole purpose of fragment retention. A glass tube breakage can put a costly stop to production, as well as obvious health risks that glass fragments can create. A common misconception is that the glass tube itself is shatterproof, when in fact it is the sleeve acting as an aid to glass retention. The material is either extruded or heat shrunk to a fluorescent lamp, acting as a glass collector should the lamp itself shatter. 
LED T8 4ft Full Glass Tube Food-Safe Shatterproof
#

LED T8 5ft Full Glass Tube Food-Safe Shatterproof

Our foodsafe coating, which is IEC 61549 compliant and can also used for long life lamps is recognisable by a green band.
 
LED T8 full glass tube providing 320° light output with food-safe shatterproof coating. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 3000K warm white, 4000K cool white or 6500K daylight colour options
• Standard 5ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC  
• Internal diffused coating
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.   
 
Crompton shatterproof tubes are full glass tubes coated in a special material with the sole purpose of fragment retention. A glass tube breakage can put a costly stop to production, as well as obvious health risks that glass fragments can create. A common misconception is that the glass tube itself is shatterproof, when in fact it is the sleeve acting as an aid to glass retention. The material is either extruded or heat shrunk to a fluorescent lamp, acting as a glass collector should the lamp itself shatter. 
LED T8 5ft Full Glass Tube Food-Safe Shatterproof
#

LED T8 6ft Full Glass Tube Food-Safe Shatterproof

Our foodsafe coating, which is IEC 61549 compliant and can also used for long life lamps is recognisable by a green band.
 
LED T8 full glass tube providing 320° light output with food-safe shatterproof coating. Energy saving with low power consumption. Includes LED starter for direct retrofit into existing single batten fittings.
• 40,000 hour life
• 15,000 switching cycles
• 3000K warm white, 4000K cool white or 6500K daylight colour options
• Standard 6ft T8 lengths
• Colour rendering index Ra≥80
• Ambient operating temperature -20ºC to 50ºC  
• Internal diffused coating
• No mercury or hazardous materials
• No warping, no bending
• No discolouration of output over life of tube
• Single ended circuit for risk free installation
• Not suitable for dimming
• Not suitable for emergency circuits 
• For indoor use only
 
Crompton Lamps recommends wiring directly to mains for optimum efficiency.   
 
Crompton shatterproof tubes are full glass tubes coated in a special material with the sole purpose of fragment retention. A glass tube breakage can put a costly stop to production, as well as obvious health risks that glass fragments can create. A common misconception is that the glass tube itself is shatterproof, when in fact it is the sleeve acting as an aid to glass retention. The material is either extruded or heat shrunk to a fluorescent lamp, acting as a glass collector should the lamp itself shatter. 
LED T8 6ft Full Glass Tube Food-Safe Shatterproof
 

Keep up to date with the latest at Crompton via  Facebook  Twitter  Google+  LinkedIn  Pinterest